Optimization of beamforming and path planning for UAV-assisted wireless relay networks

Recently, unmanned aerial vehicles （UAVs） acting as relay platforms have attracted considerable attention due to the advantages of extending coverage and improving connectivity for long-range communications. Specifically, in the scenario where the access point （AP） is mobile, a UAV needs to find an efficient path to guarantee the connectivity of the relay link. Motivated by this fact, this paper proposes an optimal design for beamforming （BF） and UAV path planning. First of all, we study a dual-hop amplify-and-forward （AF） wireless relay network, in which a UAV is used as relay between a mobile AP and a fixed base station （BS）. In the network, both of the AP and the BS are equipped with multiple antennas, whereas the UAV has a single antenna. Then, we obtain the output signal~to-noise ratio （SNR） of the dual-hop relay network. Based on the criterion of maximizing the output SNR, we develop an optimal design to obtain the solution of the optimal BF weight vector and the UAV heading angle. Next, we derive the closed-form outage probability （OP） expression to investigate the performance of the dual-hop relay network conveniently. Finally, computer simulations show that the proposed approach can obtain nearly optimal flying path and OP performance, indicating the effectiveness of the proposed algorithm. Furthermore, we find that increasing the antenna number at the BS or the maximal heading angle can significantly improve the performance of the considered relay network.     

一种宽带阵列通道均衡器设计

从基本FIR均衡器的原理出发,讨论了校正源的设置方法和均衡器系数的计算方法.为了适应宽带阵列中高速信号处理的要求,探讨了一种经典的FIR均衡器时域高速实现方法.该时域实现虽然结构简单,但在滤波器阶数较高时需要大量的乘法资源.为了降低均衡器对乘法资源的需求,借鉴快速卷积的实现方法,提出了一种基于快速傅里叶变换的高速率均衡器实现方法.与时域方法相比,该方法在滤波器阶数大于32时能明显降低对乘法资源的损耗.对实测数据的分析,验证了该方法的正确性.     

数控纤维缠绕机芯模处理软件的研究

给出了离散点输入芯模的数学处理过程，从而对任意给定的芯模轮廓曲线有了统一的处理方法，统了一芯模输入，为非测地线缠绕软件的输入芯模“微元化”提供了理论依据，并为后面的缠绕计算奠定了基础。     

自动化计量学大会展出的坐标测量机

介绍自动化计量学大会展出的坐标测量机及其结构，性能和使用范围。     

梯型螺纹量规在航天产品检测中的应用

介绍了梯形螺纹量规的的工艺性能,从外观、相互作用、螺距半角和中径的测量等方面分析了梯形螺纹量规检测技术,并对其应用规划加以阐述,以提升航天军工产品的工艺技术水平和使用可靠性。     

导引头角跟踪回路性能分析

本文分析了在导引头系统工作过程中各种干扰对系统测量精度的影响以及导引头系统参数选择与抑制干扰影响的关系，给出了导引头系统参数选择的原则。     

Morphology and Frictional Characteristics Under Electrical Currents of Al203/Cu Composites Prepared by Internal Oxidation

Two AhO3/Cu composites containing 0.24 wt.% A1203 and 0.60 wt.% A1203 separately are prepared by internal oxidation.Effectsof sliding speed and pressure on the fi-ictional characteristics of the composites and copper against brass are investigated and compared.The changes in morphology of the sliding surface and subsurface are examined with scanning electron microscope (SEM) and energy dispersive X-ray spectrum (EDS).The results show that the wear resistance of the AI203/Cu composites is superior to that of copperunder the same conditions.Under a given electrical current,the wear rate of AI203/Cu composites decreases as the AleO3-content increases.However,the wear rates of the Al203/Cu composites and copper increase as the sliding speed and pressure increase under drysliding condition.The main wear mechanisms for AleO3/Cu composites are of abrasion and adhesion;for copper,it is adhesion,although wear by oxidation and electrical erosion can also be observed as the speed and pressure rise.     

民用飞机救生筏储存箱结构设计思路探讨

民用飞机的救生筏是飞机应急着陆时使用的一种救生设备,需要有专门的储存箱来存放。详细地阐述了救生筏安装的适航要求,同时结合具体型号,以客舱天花板式储存箱为例,对救生筏储存箱的设计思路进行了探讨,并对其进行了人机功效分析。     

X线乳腺图像中微钙化检测的快速排除无病变区域法

介绍一种通过去除数字化乳腺x线照片中的无病变区域（TNR）间接地获取感兴趣区域（ROI）的方法。该方法可通过3个步骤来实现：（1）将图像划分为若干个不重合的相等大小块，并为每块计算5个特征；（2）通过域值法进行粗分析，排除肯定不含有病变的块；（3）使用代价敏感的支持向量分类器作更精细的分析，以进一步排除肯定不含有病变的块。在真实的数字化X线乳腺照片上的实验表明：该方法可以有效地去除高达81．71％的无病变区域。     

用任意拉格朗日--欧拉方法求解流体力学方程组

从积分形式的二维Lagrange流体力学方程组出发，用有限体积格式进行计算，针对不规则的四边形网格，在用次级网格的方法确定网眼内物理量的梯度的基础上，提出一种体积加权的方法来构造网眼内的线性插值多项式。将新网格进行了细划，先确定新网格小网眼中心点的密度，将小网眼的质量直接计算出来，再计算新网格的质量，然后确定相应的密度，从而实现高精度重映。最后用ALE方法进行数值模拟，得到了预期的效果。